HOTLINE: +86-18751665869 Welcome to Meilinsen International Trade Website
Current location: Home>News>News

What is the material of the film

Time:2017-11-17 9:01:02 From:Pizhou Meilinsen International Trade Co.,Ltd.

The use of coating products in the industry are as follows:
①LG high light film
The surface effect of crystal bright, colorful, long time does not change color. Soft feel, colorful surface color, environmental protection, moisture, corrosion, easy to clean, light weight, good fire performance. At present the best film products, high prices, life in 20-30 years
② other imported film
Made pearl lamination aluminum slab plate, imported pearl lamination aluminum slab plate, LG pearl coated aluminum slab plate (covered with aluminum slab plate in turn the future life and performance and gradually increased)
③ domestic film
The film thickness is typically between 0.1 and 0.3 mm. Generally well-known brands of substrate thickness between 0.1-0.2 mm.
Thicker than the visual effect of the board is more wide, but not the thicker the better, more than 0.6 mm enough, generally well-known brands of film thickness of about 0.7 mm. The easiest way to judge the thickness is to pick up and shake the board for toughness. Some businesses say that their board is thick, but flash to chaos; some board although the thickness can be, but a large proportion of the thickness of the film is covered. The thickness of the film can be viewed from the cutoff of the plate. But the exact thickness, with caliper to measure, visual or feel greater error.

PrevArticle:What principles should be taken when choosing plywood
NextArticle:Plywood construction should pay attention to matters